Why buying an alcoholmeter is important

Are you planning to distil your own spirit? You will need a still. But that’s not all you need. Another essential part for distilling your own spirit is an alcoholmeter. We will explain the importance of buying an alcoholmeter in this blog.

Using an alcoholmeter

It is important to know how to use an alcoholmeter. To measure the alcohol percentage of your home-made drink, lower the bottom of the meter into the distillate. Leave the meter like that for a while. You can read the meter to see how much alcohol your home-made drink contains. An important point of attention when measuring the alcohol percentage is the temperature of the home-made drink. When the drink is exactly 20 degrees Celsius, the measurement will be the most accurate. As a rule of thumb, you can apply the following:

  • For every degree above 20 °C, 0.2% alcohol must be subtracted from the value of the measurement
  • For every degree below 20 °C, 0.2% alcohol must be added to the value of the measurement

Buying an alcoholmeter

Buying an alcoholmeter is easy from our online shop. Our products are of the best quality and available at a competitive price. When you purchase an alcoholmeter with your still, we deliver it directly from stock and we do not charge shipping costs. That is cheap and quick to buy an alcoholmeter. Do you have any questions about the meter or one of our other products? Please contact us, free of obligation. We will be happy to help.


Making vodka

Vodka is a bland spirit with no specific character, aroma, taste, or colour. These properties are developed during the distillation process or by treating crude spirits with activated carbon or other substances. Well-distilled vodka can be further purified and refined by treating it with activated carbon and other substances. Vodka is normally not matured and can be made from grains, potatoes, sugars, fruits and just about any other product that can be fermented into alcohol. This makes vodka an economical spirit that can be made simply and quickly from readily available ingredients. Below you find everything for making vodka.

Selecting ingredients by making vodka

  1. Select the ingredients you want to ferment into vodka. Vodka is normally made from wheat, rye, barley, corn, or potatoes. You can also use sugar and molasses, either as the main ingredient or in conjunction with other ingredients. There is even a distiller who makes innovative vodka from red Pinot Noir wine. Whatever you choose, it must contain sugars or starches. This is necessary to produce alcohol. Yeast eats sugars or starches and emits alcohol and carbon dioxide.

    • When making vodka from grains or potatoes, you need to make a mash that contains active enzymes that break down the starch from the grains or potatoes and convert it into sugars that can be fermented.
    • Fruit juice already contains sugars, so when using this you don’t need enzymes that break down starch. If you make vodka from sugars, you only have to ferment it, just like with vodka from fruit juice, and you don’t have to make a paste.
    • If you make vodka from a drink that has already been fermented, such as wine, you can immediately distil it and turn it into vodka.
  2. Make sure you have enough of all the ingredients for your mash. If you’ve decided to use only potatoes for your vodka, for example, they’ll need a little extra help converting their starches into sugars. That is what the enzymes are for. Use this table to see if you need to add extra enzymes to your mash to convert starches into sugars:

                                Ingredients you will need to make your mash

    IngredientsDo you need enzymes?Additions
    Cereals and potatoesYes.Cereals and potatoes are sources of starch, not sugars. Enzymes are therefore necessary to convert the starch into sugars.
    Malted grains such as malted barley and malted wheatNo. Malted grains naturally contain a lot of enzymes that convert the starch into sugars that can be fermented.The enzymes in malted grains are activated when the grain cracks open and is briefly exposed to warm water. Ground and malted grains can be used alone, as they contain starch, or you can add them to a starchy but low-enzyme mash. Choose malted grains that are rich in enzymes, such as malted wheat.
    Refined sugar and molassesNo. These naturally already contain sugars and therefore the yeast does not need additional enzymes.You can make vodka from just sugar or you can add sugar to starchy mash to make it more fermentable.
  3. Check to see if your mash’s ingredients need additional enzymes. You can buy amylase enzyme powder that is suitable for consumption on the internet. Add this powder to your mash to convert starch into sugars when using potatoes, for example. Use the amount recommended for the amount of starch to be converted. You don’t need to use malted, enzyme-rich grains such as malted barley if you are using enzyme powder.
    • For the enzymes to convert starch into sugars, including starch from malted, enzyme-rich grain, the starch must first be gelatinised. Flaked grains are often gelatinised. Ingredients that have not been gelatinised, such as potatoes and non-flaked or malted grains, must be heated in water until they reach the temperature at which the starch will be gelatinised. Potatoes usually gel at around 66 °C and barley and wheat usually gel at around a similar temperature. So a mash of potatoes only needs to be heated to 66 °C. If you heat the potatoes to a low temperature, they should be shredded very finely before putting them in the water.
    • Enzymen die zetmeel omzetten, werken alleen op heel specifieke temperaturen en worden vernietigd als ze te heet worden. 66° C is een goede temperatuur maar als ze verhit worden tot boven de 70° C zullen ze vernietigd worden. De absolute maximum temperatuur die ze aankunnen is 74° C; in deze temperatuur zullen de enzymen een tijd hun werk doen en je kan dus ook je brij tot deze temperatuur verhitten, maar het grootste deel van de enzymen zal vernietigd worden.

     

    • 1 Try a wheat mash. In a 38-litre pot with a lid, heat 23 litres of water to 74 °C. Add 7.6 kilograms of dry flaked wheat and stir. Check the temperature and keep it between 66 °C and 68 °C. Now stir in 3.8 kilograms of crushed and malted wheat. The temperature should now be about 65 °C. Now put the lid on the pot and leave the mixture to stand for 90 minutes while stirring occasionally. During these 90 minutes the starch is converted into sugars and the mixture should become a lot less thick and viscous. After 90 minutes to 2 hours, let the mixture cool to a temperature of 27 °C to 29 °C. Leave it to stand overnight and cool slowly, but do not let it fall too far below 27 °C.

    • 2 Try a potato mash. Clean 9 kilograms of potatoes. Cook them in their skins in a large saucepan for about an hour until gelatinised. Discard the water and mash the potatoes well with a masher or in a food processor. Return the mashed potatoes to the pan and add 19 to 22 litres of water. Stir well until you get an emulsion and heat it to about 66 °C. Add 1 kilogram of crushed and malted barley or wheat to the mixture and stir well. Put the lid on the pan and leave it to stand for about 2 hours. Stir it every now and then. Leave it to cool overnight to between 27 °C and 29 °C.

      • If you let your mash cool slowly, you give the enzymes from the malted barley more time to break down the potato starch.
      3 Try a corn mash. Make a mash as you did with the wheat mash recipe, but replace the wheat with flaked, gelatinised corn. You can also germinate your corn, so you won’t have to add malted grain to your mash. There should be a sprout of about 5 cm from each grain of corn. The germinated corn contains enzymes that are formed during the germination process.

Fermentation by making vodka

  1. Clean all your equipment and prepare your workplace. Fermentation takes place in clean and disinfected vats that are sometimes open, but usually sealed airtight to avoid risk of contamination. Fermentation usually takes about three to five days.

    • Fermenting can also be done in barrels that have not been cleaned or
      disinfected and the result will also be drinkable alcohol, but because there may
      still be bacteria or yeast residues in the barrels, unwanted flavours or a higher
      amount of alcohol may develop during fermentation.
    • There are special cleaning products for sale on the internet such as B-Brite and a disinfectant called iodophor. You can buy these to clean your barrels with.
  2. Select and install your airlock lock. An airlock is a mechanism that allows CO² to escape without O² entering. 19 litres of drained mash can be fermented in a bucket with a capacity of 28 litres or in a fermentation bottle with a capacity of 23 litres. A bucket must have a lid attached and there are special caps for fermentation bottles, but you should never completely close the bottle or bucket as the pressure built up by the carbon dioxide can cause the bottle or bucket to explode. That’s why you need to attach an airlock to the lid or cap.
    • If you are fermenting your mixture in an open bucket or container, place a cheesecloth over the bucket to keep insects or other unwanted items from ending up in the mixture.

    3. Drain your mash into the bucket or bottle in which you will be fermenting. If you made a mash, use a fine strainer to drain all the liquid from your mash and drain that liquid into your well-cleaned bottle or bucket. Try to let the liquid splash into it and pour it in from as high as possible. This allows plenty of oxygen to enter the liquid. In the beginning, yeast needs oxygen to grow and ferment properly. This is because yeast makes cellular material in the form of lipids from oxygen. But after the yeast has passed this growth phase, no more oxygen should be added. Yeast makes alcohol when no oxygen is present.

    • Alternatively, you can also let your mash ferment without draining it first. But if you do this, you must get some air into the mash. For example, you can use an oxygen pump from an aquarium or an oxygen stone. You should drain some of the liquid from the mash first. It is also easier to ferment the smaller amount of mash left over after pouring, as the mash may overflow from the bottle or bucket during fermentation.
    • If you are using a mixture made of sugar, you should also mix in as much oxygen as possible by pouring it in high and allowing it to splash.
    • If you are using fruit juice, also pour it from as high as possible into the bottle or bucket and run it through a strain.

     

    • Add yeast to the mixture you want to ferment. If you are using grain yeast, it is best to hydrate it first. Then stir the yeast into your mixture with a clean, sanitised spoon. If you use an airlock, it will bubble during fermentation. When the fermentation is almost done, the bubbling will diminish or stop completely when your mixture is fully fermented. Place the fermenting liquid in a room with a temperature of about 27° to 29 °C for the best, most efficient fermentation. If you don’t want to set the heating that high, you can also heat the liquid with a heating belt or with a light bulb. Do not allow the light to shine directly on the liquid.

      • You can buy yeast that is specifically designed for distilling. This type of yeast works very well and produces a lot of ethanol during fermentation and fewer by-products and unwanted types of alcohol. How much yeast you should use depends on the type of yeast you have.
      • The packet may include yeast nutrients. Yeast nutrients are needed if you are using a mixture that does not contain as many nutrients on its own, such as sugar mixtures, but they can also improve fermentation of nutrient-dense mixtures such as grain mixtures.

    Collect the fermented liquid. Pour the fermented alcoholic liquid into a cleaned and sanitised bucket or bottle or directly into the still. Make sure you don’t add the yeast from the bottom. This could burn when heating the still. You can also strain the fermented liquid again or filter it in another way before distilling it.

Distillation

Preparing for distillation. Copper stills heat the fermented liquid with a relatively low alcohol content until it reaches a temperature higher than the boiling point of alcohol but lower than the boiling point of water. This allows the alcohol to evaporate while most of the water does not. The evaporated alcohol (and that part of the water that has evaporated) goes up the column, pipe or tube of the still. That column, pipe or tube is cooled from the outside with cold water so that the evaporated alcohol cools down and condenses and becomes a liquid again. This alcoholic liquid is collected and becomes your vodka.

  1. Heat the fermented liquid in the still to start the distillation process. How you should heat your still depends on what type of still you have. It can be done on a gas burner, wood fire or an electric hob. The desired temperature is 78.3 °C, but the temperature should not in any case exceed the boiling point of water, 100 °C. As the fermented liquid heats, the alcohol and other substances evaporate and condense back into the part of the still that is cooled by water.
  2. Discard the first portion. The first portion of distilled liquid contains many harmful substances such as methanol and other dangerous chemicals that you shouldn’t drink. If you are distilling 19 litres of liquid, you must discard the first 30 millilitres of distilled liquid. Collect the good alcohol. After you discard the first few drops, the next amount of distilled liquid will contain the desired ethanol alcohol along with some water and other substances. If you are using a column still with flowing cooling water, you can adjust the amount of cooling water you use to affect the amount and quality of the distilled liquid. Try to make sure that the amount of liquid that comes out of your still is between two and three teaspoons per minute. If too much is distilled too quickly, the quality can deteriorate.
    Discard the last portion. Towards the end of the distillation when the temperature rises to around 100 °C or above. This last portion contains fusel oil. These last few drops do not taste good and must be discarded.
  3. Check the alcohol percentage and purity of the distilled liquid. Cool some of your distilled liquid to about 20 °C and use an alcoholmeter to determine its alcohol content. There may be too little alcohol in the distillate (less than 40 percent alcohol) or it may be too concentrated (greater than 50 percent alcohol). Vodka is usually diluted before bottling, so the distillate can have a very high alcohol content. The distillate can also have too much flavour or be too aromatic and so may need to be distilled or filtered again.
  4. iDistil the distillate again if necessary or desired. This increases the alcohol percentage and increases the purity of the distillate. It is very common to distil the distillate 3 times or more to get a high-purity vodka.

Final steps:

  1. Treat the distillate with an activated carbon filter if necessary. Pour the distillate through a carbon filter, which is available to buy on the internet, to remove unwanted flavours and aromas. A carbon water filter can also be adapted to increase the purity of your distillate.
    2. Dilute the vodka until it has the right strength. Add demineralised water to your vodka until it has the desired alcohol percentage. Use an Alcoholmeter to measure the alcohol percentage.

    3. Bottle the vodka. Fill bottles with your vodka and seal them with a cork or cap. The best way to do this is to siphon and tilt the bottle as you fill it. You can make your own labels if you like. You can also buy a special machine to fill your bottles, but that is expensive and if you are producing for home use, it is better to bottle by hand.